Heating and Cooling Tips to Help You Save

Once the climate outside gets severe, it is only sensible that we make sure that our home becomes our comfort. All of us are guilty about cranking up our AC unit during the summer and blasting our heater during the winter season. However, that comfort that we want comes at a cost and it’s usually displayed in high cooling and heating bills. Thankfully, you can do something about reducing these bills without compromising your comfort. Here are useful recommendations to use:

Choke your chimney

Having a fireplace is extremely inefficient since your home’s heated air is sucked up and then discharge them outside, meaning you are only misusing money by heating air that will not even stay within your property. Moreover, your furnace will need to work harder to maintain the warmness of your home. You can actually save energy consumption by closing up your chimney tightly.

Insulate your attic

Insulating your attic can require you more money. However, you can actually save up to 30% on your heating and cooling bills according to the US Department of Energy.

Setup ceiling fans

Fans can help your room feel 3-8 degrees cooler than having no fan. This can help you to abstain from using your AC unit while having the same coolness. Moreover, ceiling fans are way more inexpensive than you imagine. You can even install it all by yourself. Installing one can definitely pay off eventually when it comes to energy bills.

Use blinds and drapes

If you are feeling hot during summertime, take some time to see whether your drapes and blinds are doing you any favors. You should have them block the sunlight that directly reflects on your home, particularly under the heat of the sun, since light could boost the room temperature by 10-20 degrees.

Minimize heat from your lightings

Lights could generate plenty of heat, which could result in an increase in your heating and cooling consumption. You should change your lights using a compact fluorescent bulb that can help reduce heat and save energy. Moreover, light bulbs can help you be warm during the winter season.

Contact Heating and Cooling Troy

Do you want your furnace or HVAC unit to be installed, repaired, or maintained by the professionals? If yes, then you must get in touch with Heating and Cooling Troy. Heating and Cooling Troy MI is a company consisting of dedicated and skilled air conditioning repair contactors that are bonded, certified, and licensed. We guarantee the valued clients that we will provide the best service in a town in terms of any task or maintenance related to air conditioners, furnace, or any HVAC systems you have. You can visit our website to get an in-home quote for free. You can also enjoy our daily articles and insights associated with the services and products we deliver. What are you waiting for? Contact our hotline number now or visit our webpage on a regular basis to be updated. Do not hesitate to share this post on your social media accounts if you think this article helped you.

How to Do Plaster Ceiling Repair

There’s some good news to older homes with plaster ceilings. Did you know that it can still be repaired? Plaster ceilings can still recover from getting further damaged. Most of the old ceilings were effectively reconnected by adding adhesives between the plaster and lath, and here is where it deteriorates over time.

While the repair technique used for plaster differs from new ones, it is still effective. The use of modern materials is what makes it work. They’re also easy to handle and cause minimal sound damage. The use of the right techniques and correct tools allow plaster ceilings to be maintained for many years to come.

How to Repair Plaster Ceilings

If your plaster ceiling is damaged, here are some of the steps that need to be done to have it repaired. It’s important that you hire the experts in plaster repair New Jersey because only the professionals can get things done the right way.

1. Check the condition of the ceiling.

To fix the problem, your ceiling has to be loosened first. So, you’ll immediately see if you have a leaky roof or if you need to do some structural changes to it. The first step is to decide how far you’re willing to repair the ceiling. Slowly move the surface and determine the quantity between the plaster and the lath. Luckily, doing that feels like moving a piece of puzzle that will slip back into its own unique place.

2. Check for a possible reinstallation work.

Reinstallation may not be an option unless the damage is extensive. If you find that the worst part of the ceiling requires a lot of effort to repair, then you might have to reconsider if you still want to use plater for that. There are other materials that can be used instead and they’re cheaper and easier to maintain.

3. Locate the wood laths.

In case repair is feasible, the next step is to find the wood laths. The holes that you drill for injection must be directly under the wood lath and not between them. That way, the adhesive sticks to something solid. You can see the lath position after removing the plaster or after digging a gap.

4. Drill injection holes.

It’s a challenge to make these holes because it is very important that you only drill through the injection surface. When connecting from the plaster side, you have to drill through the plaster completely, but stop before you reach the wood lath.

5. Secure the plaster.

Now that the adhesive is well in place, it’s time to push the plaster back into its original slot. Place it securely against the lath using forms. Doing so allows the adhesive to full bond into the surface area.

6. Remove the forms.

After a day, the plaster should have set and ready. It’s time to remove the forms. Some of the plastic will stick to the injected adhesive so be prepared for that. Simply scrape that off using a putty knife. Plaster repair is a process that not all of today’s contractors can do. Be sure to hire somebody who is experienced with the job.